COB LED Strip, which is an LED strip with the chip directly packaged on the PCB, is a high-performance lighting product. COB (technology means that the LED chip is directly packaged on the PCB to form a linear light source. The chip is mostly flip-chip technology, linear solid crystal is on the PCB board, and then a layer of packaging glue mixed with phosphor is directly dripped on the surface of the chip.
Size: 11MM
Color: white/warm white/neutral/blue/red/green/pink light
Appearance:Plane step semicircle small semicircle
Voltage: 220v
Specification: 100m/piece
High brightness and uniformity:
Since the chip is directly packaged on the PCB board and the light-emitting surface is a linear colloid, the brightness of the COB LED Strip is high and the light is uniform, without obvious light spots or granularity.
Excellent heat dissipation performance:
The COB chip is directly solid crystal on the PCB board, and the heat can be quickly transferred to the PCB board, so the heat dissipation speed is faster than that of traditional lamp bead type light strips. This helps to reduce light decay and extend service life.
Large luminous angle:
The luminous angle of the luminous surface of the COB LED Strip can reach 180°, providing a wide lighting range.
High flexibility:
The COB LED Strip usually uses a flexible circuit board as a carrier, which can be curled, cut and extended at will, which is convenient for installation and use.
Waterproof performance:
Some high-quality COB LED Strip is waterproof and suitable for outdoor or humid environments.
Home decoration:
Used for stair lighting, hallway lighting, lighting decoration, edge decoration, etc.
Commercial lighting:
Used for commercial display places such as store windows, shelf edges, and display cabinet interiors to highlight product features.
Outdoor landscape:
Use waterproof COB LED Strip to create lighting landscapes around outdoor gardens, terraces or swimming pools.
Entertainment venues:
Create cool lighting effects in entertainment venues such as KTV, bars, and nightclubs.
Brands and manufacturers:
Choose COB LED from well-known brands and high-quality manufacturers Strip to ensure the quality of the product and after-sales service.
Baseboard quality:
Check the material, thickness and toughness of the baseboard. Double-sided electroplated boards are usually more resistant to high temperatures, have better heat dissipation and better conductivity.
Lamp bead density and color rendering index:
The higher the density of the lamp beads, the better the light continuity. The higher the color rendering index, the more realistic the color reproduction.
Encapsulation colloid:
Choose a good pure color glue with good toughness and higher arc. The white edge process on both sides can make the light more focused and have high luminous efficiency.
Waterproof performance:
Choose the appropriate waterproof level according to the needs of the application scenario.
Measure the length of the installation location and cut the light strip to the appropriate length as needed.
Clean the surface of the installation location to ensure that there is no dust and dirt.
Use double-sided tape or mounting clips to fix the light strip to the installation location.
Connect the power cord and controller to ensure that the connection is correct and tight.
Turn on the power switch to test whether the COB LED Strip is working properly.
Clean the COB LED regularly Remove dust and dirt from the surface of the Strip to keep it clean and bright.
Check whether the connecting wires and controllers are working properly. If there are any abnormalities, replace or repair them in time.
Avoid long-term exposure to high temperature or humid environment to avoid affecting the service life of the product.
